火灾烟雾报警器拆除有两种方法
火灾烟雾报警器拆除有两种方法:一、烟雾报警器安装在支架的孔在顶棚上或墙上书两个孔位。按两个孔位锁两个孔。在两个孔中塞入两颗塑料腰钉,然后将安装支架的背面紧贴墙面。
There are two ways to remove the fire smoke alarm: first, the smoke
alarm is installed in the hole of the support, and two holes are written
on the ceiling or on the wall. Press the two holes to lock the two
holes. Insert two plastic waist nails into the two holes, and then close
the back of the mounting bracket to the wall.
塞入并紧固安装螺钉直至安装支架撤底牢固。要拆除烟雾报警器把支架上的螺钉拧掉,在把两个孔里的塑料腰钉拆除这样烟雾报警器就拆除了。二、分底座(固定在天花板上)和主体(滴滴响的那部分),它们是卡在一起的所以你握住主体就转一转,拽一拽的就下来了。
Plug in and tighten the mounting screws until the mounting bracket is
firmly removed from the bottom. To remove the smoke alarm, screw off the
screws on the bracket and remove the plastic waist nails in the two
holes, so that the smoke alarm can be removed. 2、 It is divided into the
base (fixed on the ceiling) and the main body (the part that drips).
They are stuck together, so you hold the main body, turn it and pull it
down.